گارانتی اصالت و سلامت فیزیکی کالا جزئیات
موجودی: موجود نیست
کد انبار
LCD-01-107
محصولات مرتبط

نمایشگر 11.6 اینچ رنگی IPS با تاچ خازنی 1920x1080 با ورودی HDMI با کاور شیشه ای مدل H محصول Waveshare ، قابلیت کارکرد برای مینی کامپیوتر های مشهور مانند رسپبری پای با پشتییبانی از Raspbian, Ubuntu, WIN10 IOT و دارا یک نقطه ی تاچ است. برا استفاده با رزبری پای نیازی به درایور نخواهد بود .زمانی که برای کهبرای مانیتور کامپیوتر مورد استفاده قرار گیرد، از ویندوز های 10/8.1/8/7 و 11 پشتیبانی میکند و 10 نقطه ی لمسی همزمان دارد و نیازی به درایور نیست.

نمایشگر برای نمایش تصویر میتواند از طریق USB فرمت های MP4, AVI, RMVB و سایر را نمایش دهد. این نمایشگر دارای منوی OSD چندزبانه میباشد. دارای جک 3.5 میلی متری صدا و پشتیبانی از خروجی HDMI است. دارای اسپیکر های HIFI نیز میباشد. همچنین از ورودی VGA نی پشتیبانی مینماید .زاویه ی دید برای این نمایشگر 75 درجه میباشد.

مشخصات فنی نمایشگر 11.6 اینچ IPS HDMI لمسی خازنی تایپ H:

ویندوز های قابل پشتیبانی : 10/8.1/8/7/11
سازگار با برد های رسپبری پای و بیگل بن بلک
سازگار با Raspbian, Ubuntu, WIN10 IOT بدون نیاز به درایور
فرمت های قابل پخش : MP4, AVI, RMVB, etc.
رزولوشن : 1920x1080
ابعاد : 11.6 اینچ

لینک محصول در سایت Waveshare

راهنمای راه اندازی محصول: www.waveshare.com/wiki/11.6inch_HDMI_LCD_(H)_(with_case)


Features

11.6inch IPS screen,1920x1080 hardware resolution
Toughened glass capacitive touch panel, 6H hardness
Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
When work as a computer monitor, supports Windows 10/8.1/8/7, ten-point touch, and driver free
Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch
Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
3.5mm audio jack supports HDMI audio output
Embedded ferrite Hi-Fi speaker
Also supports VGA input (specific cable is required and should be purchased separately)
75x75mm spacing mounting holes (M4 screw hole) for general wall mount
Comes with 75° tilt angle stand

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, the driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise, the Pi may fail to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

 

 

Write Your Own Review
تنها کاربرانی که ثبت نام کرده اند می توانند دیدگاه خود را بنویسند. لطفا وارد شوید یا یک حساب کاربری ایجاد کنید
پرسش و پاسخ
سلام.من یه رزبری پای چهار دارم و روش اندروید نصب کردم.آیا تاچ این صفحه نمایش باهاش کار می کنه یا باید درایور روش نصب کنم؟ممنون

سلام متاسفانه این موضوع تا کنون تست نشده است

با سلام آیا مانیتور حالت power saving داره و اینکه هر بار برق بهش وصل میشه نیازه دکمه پاور زده بشه تا روشن شه؟

سلام. بله یم تونه دکمه On همیشه روشن باشه تا وقتی پاور رو وصل کردید.

برای ثبت پرسش خود، لازم است ابتدا وارد سایت شوید