برد مبدل SOP16 به DIP16 مدل 200mil

[ELC-09-017]
1 نفر از خریداران، این کالا را پیشنهاد کرده اند
گارانتی اصالت و سلامت فیزیکی کالا جزئیات
موجودی: موجود نیست
کد انبار
ELC-09-017

Precautions for the use of test seat/burning seat:

  • If you find that the test cannot be done or the test performance is unstable during the use of the test seat/burning seat, it is recommended to use the following methods to solve it:
  • a) Use an air gun or an anti-static brush to remove impurities from the socket seat.
  • b) Clean the S0CKET with anhydrous alcohol, clean the attached impurities at the top of the shrapnel.
  • e) If you find that the shrapnel in the SOCKET is burned out, please purchase the corresponding socket to replace it.
  • d) The plug-in interface is not detected or cannot be tested, and check whether the shrapnel in the socket is burned out.
  • e) It is strictly forbidden to soak and clean with organic solvents such as Tianna water and board washing water to avoid damaging the internal structure of the board.
  • f) When not in use for a long time, please keep it sealed with an anti-static bag to avoid dust falling into it and affecting the test performance of the product.

Features:

  • This socket adapter can be used for universal programmers
  • SOP16 to DIP16 used for 25 series flash IC adapter
  • SOp16 to DIP16 200mil Gold Plated Adapter

 

Specifications:

  • Material: PEI, PPS
  • Lifespan: 15,000 times
  • Operating temperature: -55°C~155°C
  • Size: 2.7x2.5x1.7cm/1.06x0.98x0.67inch
Write Your Own Review
تنها کاربرانی که ثبت نام کرده اند می توانند دیدگاه خود را بنویسند. لطفا وارد شوید یا یک حساب کاربری ایجاد کنید
پرسش و پاسخ
سوالی پرسیده نشده است
برای ثبت پرسش خود، لازم است ابتدا وارد سایت شوید