ریموت تک کانال 315MHz کد لرن قهوه ای به همراه ماژول گیرنده و کیس
- +25 5 % 273,900 تومان
- +50 7 % 267,200 تومان
- +100 9 % 260,400 تومان
- +300 12 % 253,600 تومان
- +500 14 % 246,800 تومان
این محصول فاقد باتری بوده و باتری مناسب آن A27 می باشد.
نحوه راه اندازی:
دکمه ی روی برد را یک بار فشار بدهید تا چراغ روی برد روشن شود.
سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.
ریموت با ماژول Pare می شود و کار میکند.
برای تغییر مود ریموت نیز دکمه روی برد را دوبار فشار بدهید تا چراغ روی برد روشن شود.
سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.
برای پاک کردن ریموت نیز دکمه روی برد را سه بارفشار بدهید تا چراغ روی برد روشن شود.
سپس دکمه روی ریموت را فشار بدهید تا چراغ روی برد چشمک بزند.
It is a learning code wireless remote control switch, whose output / working way can be changed as you like, and it is easy to match the transmitter. It has a small volume, stable and reliable performance, and high receive sensitivity.
Features:
1. This remote control switch is designed to control a wide variety of electronic devices with a wireless signal.
2. It covers application areas from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security, etc.
3. Extremely easy to set up and use.
4. Radio frequency identification technology.
5. It has a small volume, stable and reliable performance, and high receive sensitivity.
Wireless digital identification technology, each switch has independent passwords, do not interfere with each other.
Wireless RF remote control, no direction, the signal can pass through walls.
No need for wiring can save wire costs, saving time and effort.
Provide passive switch: NO is normally open port, COM is a common port, equivalent to on and off, and when the relay is energized, NO and COM are connected.
Specification:
Receiver:
- Operating voltage: DC 12V
- Operating frequency: 315MHz
- Receiver sensitivity: <-105dB
- Encoding type: Fixed code, welding code to achieve the pairing (oscillation resistance is 820K)
- Size: 32 x 32 x 16.5mm
Remote Control Transmitter:
- Working voltage: DC 12V
- Frequency: 315MHz
- Encoding type: Fixed code
- Firing range: 100 meter (the actual use is about 10-30 meters)
- Size: 63 x 39 x 11.5mm
- Shock resistance: 4.7M
Learning and coding method:
Press the receiver learning button once until the indicator flashes once, then press the remote control button. Learning is completed.
Control Mode:
1). Self-Lock Mode: Press->On;
Press again->Off (Need 1 channel switch and 1 remote control button.)
Press one button for working/ ON. Press the same button again for stopping/ OFF.
2). Inter-Lock Mode: Press->On;
Press another button ->Off (Need 1 channel switch and 2 remote control buttons.)
Press one button for working/ ON, press another button for stopping/ OFF.
3). Jog Mode: Press and hold->On;
Release->Off (Need 1 channel switch and 1 remote control button.)
Keep pressing one button for working/ ON. Remove your finger for stopping/ OFF.