برد بیگل بن بلو - BeagleBone Blue
برد بیگل بن بلو - BeagleBone Blue برد بیگل بن بلو - BeagleBone Blue برد بیگل بن بلو - BeagleBone Blue

برد بیگل بن بلو - BeagleBone Blue

[MIN-04-002]
گارانتی اصالت و سلامت فیزیکی کالا جزئیات
30 هزار تومان تخفیف اولین خرید با کد HELLO (حداقل خرید 300 هزار تومان)
موجودی: موجود نیست
کد انبار
MIN-04-002
تامین بصورت سفارشی

این کالا از چرخه تجدید موجودی کافه ربات حذف شده و فقط بصورت پیش سفارش ارائه می‌شود.

The BeagleBone Blue Development Board is an all-in-one solution for robotics and embedded applications. Powered by the AM335x 1GHz ARM Cortex-A8 processor, it offers integrated graphics, a floating-point accelerator, and dual PRU microcontrollers. With comprehensive connectivity options, power management, and pre-installed robotics software support, this board is perfect for developers working on drones, mobile robots, and similar projects.

Specifications of BeagleBone Blue Development Board

Processor

  • AM335x 1GHz ARM Cortex-A8

  • SGX530 Graphics Accelerator

  • NEON Floating-Point Accelerator

  • 2x PRU 32-bit 200MHz Microcontrollers

Memory

  • 512MB DDR3 800MHz RAM

  • 4GB 8-bit eMMC On-Board Flash Storage

  • microSD Slot for Expandable Storage

Software Compatibility

  • Debian

  • ArduPilot

  • ROS

  • Cloud9 IDE on Node.js with BoneScript Library

Connectivity

  • USB Ports:

    • USB 2.0 Client (microUSB)

    • USB 2.0 Host (Type-A, 500mA)

  • Wireless:

    • WiLink 1835 Wi-Fi 802.11 b/g/n with 2x2 MIMO, AP, SmartConfig, STA, Wi-Fi Direct, and Mesh over Wi-Fi

    • Bluetooth 4.1 with BLE

I/O Interfaces

  • UART: UART0, UART1, UART5 (4-pin JST-SH), UART2 (6-pin JST-SH), UART4 RX (3-pin DSM2)

  • I²C: I²C1 via 4-pin JST-SH

  • SPI: SPI1 CS0 and CS1 via 6-pin JST-SH

  • CAN: 4-pin JST-SH (includes TCAN1051 CAN transceiver)

  • GPIO: 8 GPIOs via 6-pin JST-SH

  • ADC Inputs: Channels 0–3 via 6-pin JST-SH

  • Power Output: 3.3VDC and 5VDC via 4-pin JST-SH

Power Management

  • TPS65217C PMIC and a separate LDO for power regulation

  • Supports 9–18V DC input, USB, and 2S LiPo battery with built-in charger

  • 6VDC 4A regulator for servo motor outputs

Debug Support

  • JTAG test points

User Input/Output

  • Power, Reset, and Boot buttons

  • 2 configurable buttons (MOD, PAU)

  • 11 configurable LEDs (including USR0-3, Red, Green, Wi-Fi, Battery level)

  • Charger and Power LEDs

Motor Control

  • 4 DC Motor Drivers

  • 4 Quadrature Encoder Inputs

  • 8 Servo Motor Outputs

Sensors

  • 9-Axis IMU

  • Barometer

Development Resources of BeagleBone Blue Development Board

Write Your Own Review
تنها کاربرانی که ثبت نام کرده اند می توانند دیدگاه خود را بنویسند. لطفا وارد شوید یا یک حساب کاربری ایجاد کنید
پرسش و پاسخ
سوالی پرسیده نشده است
برای ثبت پرسش خود، لازم است ابتدا وارد سایت شوید