گارانتی اصالت و سلامت فیزیکی کالا
جزئیات
30 هزار تومان تخفیف اولین خرید با کد HELLO (حداقل خرید 300 هزار تومان)
موجودی:
کد انبار
SEN-02-009
تامین بصورت سفارشی
این کالا از چرخه تجدید موجودی کافه ربات حذف شده و فقط بصورت پیش سفارش ارائه می‌شود.
محصولات مرتبط
ماژول ژیروسکوپ و شتاب سنج 3 محوره GY-25
403٬400 تومان
ماژول شتاب سنج 3 محوره دیجیتال ADXL362
270٬000 تومان
ماژول شتاب سنج 3 محوره دیجیتال ADXL346
171٬900 تومان
The ADXL357 Three-Axis Accelerometer Sensor Module is designed for precision applications requiring low noise, low power consumption, and high stability. Encased in a hermetically sealed package, this module ensures long-term stability and reliability. It is suitable for a wide range of applications, including inertial measurement units (IMUs), structural health monitoring, robotics, and condition monitoring.
Specifications of ADXL357 Three-Axis Accelerometer Sensor Module
- Package: Hermetically sealed, 14-pin, 6 mm × 6 mm × 2.1 mm LCC package, 0.26 g
- 0 g Offset and Temperature (all axes): 0.15 mg/°C maximum
- Power Supply (LDO enabled):
- Measurement mode: 200 μA (digital)
- Standby mode: 21 μA
- Interface: Digital serial peripheral interface (SPI)/I2C interface
- ADC: 20-bit analog-to-digital converter (ADC)
- Filters: Programmable high-pass and low-pass digital filters
- Self-Test: Electromechanical self-test
- Temperature Sensor: Integrated
- Voltage Range Options:
- VSUPPLY with internal regulator: 2.25 V to 3.6 V
- V1P8ANA, V1P8DIG bypassed by internal LDO: 1.8 V (typical, ±10%)
- Operating Temperature Range: -40°C to 125°C
- Measurement Ranges: ±2g, ±4g, ±8g
How to Use the ADXL357 Three-Axis Accelerometer Sensor Module
- Power Supply Connection:
- Connect the power supply to the VSUPPLY pin. Ensure the voltage is between 2.25V and 3.6V for the internal regulator, or 1.8V for bypassed internal LDO.
- Interface Connection:
- Use the SPI or I2C interface to communicate with the sensor module. Configure the appropriate pins for the selected communication protocol.
- Configuration:
- Set up the measurement range according to your application requirements: ±2g, ±4g, or ±8g.
- Program the high-pass and low-pass digital filters as needed for your application.
- Calibration:
- Perform initial calibration to ensure accurate readings. The module features low 0 g offset drift, reducing the need for frequent recalibration.
- Data Acquisition:
- Utilize the 20-bit ADC for high-resolution data capture.
- Use the data interpolator for simultaneous sampling and improved accuracy.
- Self-Test:
- Use the electromechanical self-test function to verify sensor functionality and performance.
Applications of ADXL357 Three-Axis Accelerometer Sensor Module
- Inertial Measurement Unit (IMU) / Attitude and Heading Reference System (AHRS)
- Platform Stabilization Systems
- Structural Health Monitoring
- Seismic Imaging
- Tilt Detection
- Robotics
- Condition Monitoring
Datasheet of ADXL357 Three-Axis Accelerometer Sensor Module
Write Your Own Review
پرسش و پاسخ