مبدل منطقی (لاجیک کانورتر) دو طرفه 8 بیتی با قابلیت تبدیل 5 به 3.3 ولت و برعکس
- +100 7 % 33,020 تومان
- +300 10 % 32,140 تومان
- +500 12 % 31,270 تومان
- +1000 15 % 30,390 تومان
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge can be. A bidirectional logic level translator is a small device that safely steps down a 5V signal to 3.3V while boosting 3.3V to 5V. This level shifter is also available for 2.8V and 1.8V devices. What sets this logic level translator apart from our previous versions is that you can successfully set high and low voltages and safely raise and lower them on the same channel. Each level shifter has the ability to convert 4 pins on the high side to 4 pins on the low side, with two inputs and two outputs for each side
Level shifters are very easy to use. The board needs to be powered by the two voltage sources (high voltage and low voltage) used by the system. High voltage (eg 5V) to "HV" pin, low voltage (eg 3.3V) to "LV", ground from system to "GND" pin
Pin Definition:
Compatible with 5-3V systems
VIN is connected to 5V system power supply
5A to 5V system
5B is connected to 5V system
GND connects to 5V system GND
3V3 connects to 3V system power supply
3A connection to 3V system
3B connection to 3V system
GND connects to 3V system GND
Dimensions: 28×19mm / 1.1×0.74 inches
