برد توسعه آردوینو گیگا R1 Wifi
برد توسعه آردوینو گیگا R1 Wifi برد توسعه آردوینو گیگا R1 Wifi برد توسعه آردوینو گیگا R1 Wifi

برد توسعه آردوینو گیگا R1 Wifi

[ARD-01-070]
گارانتی اصالت و سلامت فیزیکی کالا جزئیات
30 هزار تومان تخفیف اولین خرید با کد HELLO (حداقل خرید 300 هزار تومان)
موجودی: موجود نیست
کد انبار
ARD-01-070
تامین بصورت سفارشی

این کالا از چرخه تجدید موجودی کافه ربات حذف شده و فقط بصورت پیش سفارش ارائه می‌شود.

The Arduino GIGA R1 WiFi is a powerful development board designed for high-performance IoT and embedded applications. It features the STM32H747XI dual-core microcontroller with both Cortex®-M7 and Cortex®-M4 processors, making it ideal for complex projects that require multitasking and high processing power. With its onboard WiFi and Bluetooth module, secure element, and a wide range of I/O pins, this board supports extensive connectivity and robust security features. Its compatibility with Arduino IDE and multiple communication protocols makes it easy for developers to integrate into their projects.

Specifications of Arduino GIGA R1 WiFi

  • Microcontroller: STM32H747XI dual Cortex®-M7 (480 MHz) + M4 (240 MHz)

  • Memory: 2MB Flash, 1MB RAM

  • Radio Module: Murata 1DX (WiFi 802.11b/g/n, Bluetooth)

  • Secure Element: ATECC608A-MAHDA-T

  • USB Ports:

    • USB-C® Programming / HID Port

    • USB-A Host (PA_15 enabled)

  • I/O Pins:

    • Digital: 76

    • Analog: 12

    • DAC: 2 (DAC0, DAC1)

    • PWM: 12

  • Communication: 4x UART, 3x I2C, 2x SPI, CAN (external transceiver required)

  • Power:

    • Operating Voltage: 3.3V

    • Input Voltage (VIN): 6-24V

    • DC Current per I/O Pin: 8mA

  • Camera Connector: I2C + D54-D67

  • Display Connector: D1N, D0N, D1P, D0P, CKN, CKP + D68-D75

  • Audio Jack: DAC0, DAC1, A7

  • Dimensions: 53mm (width) x 101mm (length)

Datasheet of Arduino GIGA R1 WiFi

Development Resources

مشخصات
MCU/SoC STM32H747XI
Product Family Arduino
Architecture ARM Cortex-M7
CPU Cores dual-core (Cortex-M7 + Cortex-M4)
Clock Speed (MHz) 480 MHz
Flash 2MB
SRAM 1MB
External Memory 16MB QSPI Flash, 8MB SDRAM
GPIO Pins 76
SPI interface Pins 2
I2C interface Pins 3
UART interface Pins 4
USB Ports 1x USB-C (Programming/HID), 1x USB-A (Host)
CAN Bus Support external transceiver required
Ethernet Support No
ADC Channels 12
DAC Channels 2
PWM Channels 12
Timers Count 22
Operating Voltage (V) 3.3V
GPIO Voltage (V) 3.3V
GPIO Current (mA) 8mA
Wireless Bluetooth, WiFi
Form Factor 53mm x 101mm (Mega form factor)
IDE Support Arduino IDE
Input Voltage (V) 6-24V
Antenna Type External IPEX/IPX
Bluetooth Ver. 4.2
Write Your Own Review
تنها کاربرانی که ثبت نام کرده اند می توانند دیدگاه خود را بنویسند. لطفا وارد شوید یا یک حساب کاربری ایجاد کنید
پرسش و پاسخ
سوالی پرسیده نشده است
برای ثبت پرسش خود، لازم است ابتدا وارد سایت شوید