جشنواره ویژه عید فطر: از ۵ تا ۵۰ درصد تخفیف برای همه کالاها! ۲۴ اردیبهشت
بــا مــا تــماس بگـــیریـد
۰۱۶۹ ۹۱۰۷ ۰۲۱
سبد خرید 0

شما هیچ آیتمی در سبد خریدتان ندارید.

Product was successfully added to your shopping cart.
دستگاه کنترل تردد با قابلیت خواندن کارت RFID ( فرکانس 13.56MHz ) مدل CU-K15-IC10 دستگاه کنترل تردد با قابلیت خواندن کارت RFID ( فرکانس 13.56MHz ) مدل CU-K15-IC10 دستگاه کنترل تردد با قابلیت خواندن کارت RFID ( فرکانس 13.56MHz ) مدل CU-K15-IC10
دستگاه کنترل تردد با قابلیت خواندن کارت RFID ( فرکانس 13.56MHz ) مدل CU-K15-IC10

دستگاه کنترل تردد با قابلیت خواندن کارت RFID ( فرکانس 13.56MHz ) مدل CU-K15-IC10

برای نظر دادن به این محصول اولین باشید

‎392٬500تومان

موجودی: موجود در انبار 5

کد انبار: RFID-01-005

جزییات

The non-contact proximity card access controller is one of the modern and advanced access control system. It selected the latest central processing unit (CPU) and a large-capacity memory chips, all the information is not lost due to power; powerful, with proximity card to open the door, open the door sensor Calgary password, the password to open the door three kinds of ways to open the door;

the door status monitoring, improve security measures output alarm, security mode, the tamper sensor Calgary password allows users to more secure; open button, close reminder, doorbell, which can be accessed normally open or normally blocking and other powerful features allow users more convenient.

This product provides a secure entrance automatic control mode, is the ideal device for business organizations, offices, factories, residential, community and other places.

 

Technical parameters:

Power supply DC: Voltage 12V ± 10% Current <0.1A

Dimensions 116mm × 116mm × 20 mm

Weight 130 g 4

ambient temperature 0 ° C -60 ° C

Relative humidity 20% -80%

user card storage capacity of 255, a group of open code

reading distance 5-15CM 8

Card type EM or EM compatible card (125Khz )

 

sound and light indication:

LED indicator:

red light green light incident

normal flashes once per second

read valid card bright

reading light illegal card

bright unlock

button type bright

light into the programming

program to confirm bright

 

Built-in Buzzer:

Event Description beep

read valid card twice short beep beep

beep sounding once read illegal card -

type key is valid a short beep beep

enter the password twice short beep beep valid

password wrong once blew tick -

two short beeps confirm programming Didi

tamper alarm sounding continuously beep - beep - beep -

 

set up and use:

1, the initial password: Programming password is 9999.

2. Enter programming mode:

Press * # to enter programming mode programming code.

3. Feature Sets:

(1) modify the programming code:

Press * programming code # 0 # new password repeat new password # *

Note: The password is any number 4-6.

(2) increase the user card:

Press * programming code # 1 card reader to enter the Code # *

Note: The card code is 001-999 unrepeatable three digits, you must enter the code, otherwise the card is invalid.

For a continuous increase in card, after the three-digit code losers having to press # to directly read the second card.

(3) Delete user card (there are three ways):

A, according to the programming code * # 20000 # *

delete all user card;

B, according to the programming code * # * # 2 reader

deleted card to be read;

C Press * programming code # 2 The card code is # *

delete lost card;

(4) Set open mode:

Press * programming code # 300 # * read valid card to open the door

, press * programming code # 301 # * Reader add a password to open the door

, press * programming code # 302 # * Reader or password to open the door

Note: The factory setting is the reader or the password to open the door;

(5) Set open time:

Press * programming code # 4 XX # *

Note: XX is 00 -99 seconds, factory setting is 6 seconds.

(6) Set Public Open Code:

Press * programming code # 5 Repeat new password new password # # *

Note: The password is any number 4-6.

Note: The above settings in the last press * before pressing a key interval not more than ten seconds

4, use:

(1) normal operating state reading a valid card to open the door;

(2) If you need to read the card with a password , enter within 10 seconds after reading the card the correct password to open the door;

(3) If you forget your password programming, you can use the jumper switch on the motherboard "RESET" to restore the factory settings. Turn off the power to the

 

jumper switch to "ON" position, and then turn on the power, the buzzer beeps three jumpers will switch back to "OFF" position to rest

  1. برای نظر دادن به این محصول اولین باشید

نظر خودتان را بنویسید

فقط کاربران عضو سایت می توانند نظرات جدید ارسال کنند؛ لطفا, وارد شوید یا ثبت نام کنید

پرسش و پاسخ

  • سوال خود را برای مدیران و مخاطبان کافه ربات ارسال کنید.