آموزش های گام به گام
یادگیری را از اینجا شروع کنید
شما هیچ آیتمی در سبد خریدتان ندارید.
یادگیری را از اینجا شروع کنید
سفارشات بالای ۲۰۰ هزار تومان
مرجوعی راحت و بی دردسر!
برای مشتریان دائمی!
The nRF51822 is a powerful, highly flexible multiprotocol SoC ideally suited for Bluetooth® Smart (previously called Bluetooth low energy) and 2.4GHz ultra low-power wireless applications. The nRF51822 is built around a 32-bit ARM® Cortex™ M0 CPU with 256kB/128kB flash + 32kB/16kB RAM. The embedded 2.4GHz transceiver supports both Bluetooth Smart and the Nordic Gazell 2.4 GHz protocol stack which is on air compatible with the nRF24L series products from Nordic Semiconductor.
nRF51822 incorporates a rich selection of analog and digital peripherals that can interact without CPU intervention through the Programmable Peripheral Interconnect (PPI) system. A flexible 31-pin GPIO mapping scheme allows I/O like serial interfaces, PWM and quadrature demodulator to be mapped to any device pin as dictated by PCB requirements. This enables complete design flexibility associated with pin-out location and function.
nRF51822 supports Bluetooth® Smart protocol stacks as well as 2.4GHz protocol stacks, including Gazell, both available as downloads. nRF51822 requires a single power supply and gives the user the option of using on chip linear regulators giving a supply range of 1.8-3.6V, a direct 1.8V mode and a on chip DC-DC buck converter giving a supply range of 2.1-3.6V. The use of the DC-DC converter can be dynamically controlled during run time and enables nRF51822 to operate at radio peak currents below 10 mA @ 3V supply (TX @ 0 dBm & RX).
Bluetooth 4.1 compliant low energy single-mode protocol stack
L2CAP, ATT, and SM protocols
GATT, GAP, and L2CAP
Concurrent Peripheral and Broadcaster roles
GATT Client and Server
Full SMP support including MITM and OOB pairing
Complementary nRF51 SDK including Bluetooth profiles and example applications
Master Boot Record for over-the-air device firmware update
Memory isolation between application and protocol stack for robustness and security
Thread-safe supervisor-call based API
Asynchronous, event-driven behavior
No RTOS dependency
Any RTOS can be used
No link-time dependencies
Standard ARMR Cortex™-M0 project configuration for application development
Support for concurrent and non-concurrent multiprotocol operation
Concurrent multiprotocol timeslot API
Alternate protocol stack running in application space
Single chip, highly flexible, 2.4 GHz multi-protocol device
32-bit ARM Cortex M0 CPU core
256kB/128kB flash + 32kB/16kB RAM
Supports Bluetooth Smart protocol stacks
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L series
3 data rates (2Mbps/1Mbps/250kbps)
+4dBm output power
-93dBm sensitivity, Bluetooth Smart
PPI system for maximum power-efficient applications and code simplification
Flexible power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
Mobile phone accessories
Rezence wireless charging monitoring
Consumer Electronics (CE) remote controls
Sports, fitness and healthcare sensors
Smart RF tags
Toys and electronic games
Intelligent domestic appliances
Industrial and commercial sensors