
ماژول گیرنده بی سیم TYJM01 دارای دیکودر
ماژول گیرنده بی سیم TYJM01 با دیکودر یک ماژول RF (فرکانس رادیویی) جمع و جور و چندمنظوره است که برای کاربردهای کنترل از راه دور طراحی شده است. این ماژول دارای یک دیکودر است که به آن امکان میدهد سیگنالها را از کنترلهای از راه دور سازگار دریافت کرده و آنها را به دستورات قابل اجرا برای دستگاههای متصل تبدیل کند. این ماژول برای سیستمهای کنترل بیسیم مختلف از جمله اتوماسیون خانگی، ورودی بدون کلید از راه دور و کاربردهای صنعتی که نیاز به ارتباط بیسیم قابل اعتماد دارند، مناسب است.
مشخصات فنی ماژول گیرنده بی سیم TYJM01 دارای دیکودر
- توان: 2.5-5V
- خروجی: پورت IO چهارطرفه (سطح بالا و پایین)
- انواع منطق خروجی: 3 نوع، پیشرفته، قفل خودکار، قفل متقابل. مطابق با فرکانسهای مختلف، در مجموع 6 گزینه
- ضخامت پنل PCB: 0.8mm
- ابعاد: ضخامت 4.8 میلیمتر * طول 21 میلیمتر * عرض 13 میلیمتر
نحوه استفاده از ماژول گیرنده بی سیم TYJM01 با دیکودر
مربوط به جفت سازی: برای 2 ثانیه دکمه کوچک روی برد دریافت را نگه دارید. پس از رها کردن آن، چراغ قرمز کوچک روشن میشود. بلافاصله هر کلیدی از کنترل از راه دور را فشار دهید؛ چراغ قرمز کوچک پاسخ خواهد داد که نشاندهنده جفتسازی موفق است.
مربوط به تنظیم مجدد: برای 10 ثانیه دکمه کوچک روی برد دریافت را نگه دارید تا تمام کنترلهای از راه دور ذخیرهشده پاک شوند.
مربوط به ولتاژ: این دستگاه با ولتاژ DC 2.5-5V به طور معمول کار میکند.
انتخاب حالت ماژول گیرنده بی سیم TYJM01 دارای دیکودر
انتخاب حالت جوج: دکمه یادگیری را برای دو ثانیه نگه دارید، آن را رها کنید و سپس سریعاً دوباره فشار دهید. پس از رها کردن، چراغ یادگیری یک بار چشمک میزند.
انتخاب حالت قفل: دکمه یادگیری را برای دو ثانیه نگه دارید، آن را رها کنید و سپس دو بار سریعاً فشار دهید. پس از رها کردن، چراغ یادگیری دو بار چشمک میزند.
قفل متقابل: دکمه یادگیری را برای دو ثانیه نگه دارید، آن را رها کنید و سپس سه بار سریعاً فشار دهید. پس از رها کردن، چراغ یادگیری سه بار چشمک میزند، که نشاندهنده انتخاب حالت 3 است.
TYJM01 Wireless Remote Control Receiver Module With Decoder
The TYJM01 Wireless Remote Control Receiver Module with Decoder is a compact and versatile RF (Radio Frequency) module designed for remote control applications. It integrates a decoder that allows it to receive signals from compatible wireless remote controls and decode them into actionable commands for connected devices. This module is suitable for various wireless control systems, including home automation, remote keyless entry, and industrial applications requiring reliable wireless communication.
Specifications of TYJM01 Wireless Remote Control Receiver Module With Decoder
- Power: 2.5-5V
- Output: 4-way IO port (high and low level)
- Types of the output logic: 3-types, advance, self-locking, interlocking. Corresponding to different frequencies, a total of 6 options
- PCB Panel Thickness: 0.8mm
- Size: thickness 4.8 * length 21 * width 13mm
How to use TYJM01 Wireless Remote Control Receiver Module With Decoder
Regarding Pairing: Hold the small switch on the receiving board for 2 seconds. Release it to activate the small red light. Immediately press any key on the remote control; the small red light will respond, indicating successful pairing.
Regarding Resetting: Hold the small switch on the receiving board for 10 seconds to clear all stored remote controls.
Regarding Voltage: The device operates normally with DC 2.5-5V.
Mode selection of TYJM01 Wireless Remote Control Receiver Module With Decoder
Jog mode selection: Press and hold the learning button for two seconds, release it, and press it quickly again. After releasing it, the learning light will flash once in response.
Latch mode selection: Press and hold the learning button for two seconds, release it, and press it quickly 2 times again. After releasing, the learning light will flash 2 times in response.
Interlock: Press and hold the learning button for two seconds, release it, and press it quickly 3 times again. After releasing, the learning light will flash 3 times in response, indicating that the current mode is mode 3.